Hello,
Thank you for your reply.
I refer your comments.
Please let me ask questions about them.
----------------------------------------------------------
Question 3:
In the script in ADV7611-VER.3.0c.txt 6-1f Port A, the register setting is as follows:
98 19 83 ; LLC DLL phase
In your comment, the register setting is as follows:
98 19 88 ; set DLL_LLC_DOUBLE back to 0
The "98 19 88" indicates LLC_DLL_PHASE[4:0] (IO, Address 0x19[4:0]) is changed from "98 19 83".
Do we have to change LLC_DLL_PHASE[4:0]?
Why?
----------------------------------------------------------
Question 4:
In the script in ADV7611-VER.3.0c.txt 6-1f Port A, the register setting is as follows:
98 02 F5 ; Auto CSC, YCrCb out, Set op_656 bit
The "98 02 F5" indicates ALT_GAMMA=0 (No conversion).
When BT.709 is input, do we have to set ALT_GAMMA=1?
----------------------------------------------------------
Question 5:
In the script in ADV7611-VER.3.0c.txt 6-1f Port A, the register setting is as follows:
98 02 F5 ; Auto CSC, YCrCb out, Set op_656 bit
The "98 02 F5" indicates OP_656_RANGE=1 (Enables limited output range (16 to 235)).
I think we should set OP_656_RANGE=0 when we want output range to 0-255.
----------------------------------------------------------
Question 6:
I think we should confirm HDMI_COLORSPACE[3:0](Addr 68 (HDMI), Address 0x53[3:0]).
What do you think?
----------------------------------------------------------
I'm sorry many questions.
Thank you!
Best regards.