Re: Blackfin607 NOR Flashing

Hi Aaronwn,

Thanks for reply.

I verified

1). Cable Tx and Rx loopback works fine getting character on minicom (57600 at 57600 8N1).

I do not do resent after command:

bfin-uclinux-ldr -l  u-boot/u-boot.ldr /dev/ttyUSB0

then sudo minicom -s

set 57600 and 8N1

but did not get bfin u-boot console.

Please let me intimate what i am doing wrong in the procedure.

Ones again want to explain my project detail and which u-boot i am using.

1). Our design is same as bf-609 EZKIT.

2). Parallel NOR and DDR2 are also same as per evaluation kit.

3). Processor bf607 Silicon Revision (0.1)on custom board.

I downloaded u-boot, kernel, buildroot and toolchain from link:

developing:blackfin_live_sources [Analog Devices Open Source| Mixed-signal and Digital Signal Processing ICs]

and compiled on linux(ubuntu 14.04) machine successfully.

Or please suggest some other working images or link from where could download comfortably(if any problem in above link).

Please suggest to resolve this problem.

Thanks,

Vidya