Hi,
We have list of video receivers, encoders and decoders available at Read First: Design Support Files Overview
All of the HDMI receivers listed above just take the audio data from audio sample packets and it just passes the audio at the output and it will not decode audio. If you have DSP like BF/SHARC then it can able to decode the audio.
For the latest list of available encoder/decoders from ADI go to the Blackfin or SHARC SW Modules online lists
Best Regards,
Jeyasudha.M
Hi,
Your question has been forwarded to the part specialist and you will get an update soon
Best Regards,
Jeyasudha.M
Hi pavelkrupits,
I am checking on this and get back to you soon.
Regards,
Jonathan
I would like to ask： AD9164 development board output linear frequency continuous wave maximum number GHZ and minimum number GHz, can output 5-7.5G linear continuous wave?Sit back and reply
Hi Yuya,
Thanks for asking, for your first question, I am still looking into it and will give you a response as soon as possible.
However for your second question, I didn't understand what you mean when you asked "Is it necessary to handle voltage input from outside when using internal reference?", can you please re-phrase your question? Thanks.
Cheers,
Ivan
running this command i get the following output:
Library version: 0.10 (git tag: 11b871b)
Compiled with backends: xml ip usb serial
Available contexts:
0: 0456:b673 (Analog Devices Inc. PlutoSDR (ADALM-PLUTO)), serial=104473222a8700100b0013006cb1d51124 [usb:2.2.5]
but the issue is that matlab during hardware setup can't find radioID and this Serial nnumber
Q1. There are many potential causes for distorted color output from the ADV7180.
Could you share a picture of the color output.
Firstly could you please read the registers 0x10 to 0x13 when the ADV7180 is showing this issue. Could you please post the results here.
Secondly I advise placing an oscilloscope probe on the crystal output. The crystal should be oscillating at 28.63636 MHz. Check if placing an oscilloscope probe on the crystal output makes the color quality better/worse.
Thirdly I advise forcing the ADV7180 into free-run mode.
Q2. The crystal on the ADV7180 evaluation board is a Golledge MA01377 Quartz Crystal. Details on this crystal are below.
regards,
Robert Hinchy
Hi,
HMC-SDD112 is a die product for which we don't have evaluation board. You will need to design your own substrate for evaluation. See the last 2 pages of datasheet for recommended assembly diagram and Mounting & Bonding Techniques.
Best.
By default the IN_LOCK bit only indicates horizontal lock.
The FSC_LOCK bit indicates color sub-carrier lock.
There is no vertical lock register in the ADV7180. The customer could check the field or Vsync output synchronization signals from the ADV7180.
Also they need to ensure that the ADV7180 is not programmed into fast switch mode. The ADV7180 is less robust to non-standard video sources in fast switch mode.
regards,
Robert Hinchy
Thanks for fixing the issue. Do I need to re-compile the entire kernel or is there a way to include only this fix into my system?
I'd be happy if you could provide some instructions.
Thank you and best regards.
Yes - you need to rebuild your kernel.
Please follow the instructions here: Building the 2015_R2 release Linux kernel and devicetrees from source
However please use 2016_R2 instead of 2015_R2 !
-Michael
Hi Thierry, could you explain in details the background of your problem, your requirement and goal, we will check what we can help. Thanks.
Hi Brettcoupe,
The Sigma Studio for SHARC release package 3.8.0 or later version is having ADSP SC573 dual core DSP's support.
Thanks.
Hi,
We are looking in to your question. Will provide an update soon.
Best Regards,
Jeyasudha.M
Great Thanks
Hi dragosB
I have changed in ad9361_init parameter to 70000000 instead of 2400000000 but no output in TX port. I request u to replicate in your setup.
Regards
J S Hyanki
Hi Andrei,
thanks , i could build project using make.but the link which u sent https://github.com/analogdevicesinc/hdl/blob/dev/projects/adrv9361z7035/common...
in this folder there is no make file
kindly send me the link for the make file which i need to use for Picozed SDR
how much time/clock cycles will AD9850 take to update frequency on a 125MHz source?
Hi Antonio,
The information is in datasheet. The absolute maximum ratings are same for either mode.
Regards.