ADV7188
HelloI would like to ask on the above ADV7188 decoder.I think I see on its datasheet (Rev 0 from 2005) a contrediction between Table 9 and Table 101at the definition of INSEL[3:0] Register about values...
View ArticleRe: AD9364 External LO phase noise
Hello again, I measured the phase noise at the Tx output as you suggested, with internal and external Tx LO - in both cases the phase noise was ~-116dBc/Hz at 5-20MHz offsets (the test was done with Tx...
View ArticleAD5560 used for multiple power supplies
Hi, We are design engineers from the company, currently we have one project to adopt AD5560 for the power source design, we have LCD module driving with different power rails, totally we have five...
View ArticleRe: AD5560 used for multiple power supplies
We are developing the test fixture for LCD modules and our mass production will reach more than 30K per year, thanks.
View ArticleRe: AD9361 Reference Design for the Altera Cyclone V SoC Board
Hi Dragos Many thanks for the reply & link.Can you further help with a feq follow-up questions:Is there a document with a picture the setup of the design similar to the one we have of the Xilinx...
View ArticleRe: No filters in the receive path on FMCOMMs1?
Hi, Charly Does I understand it right ? About the position of LPF filter be populated, between the ADL5380 and AD8366, or between the AD8366 and the ADC? What do you think? Thanks. Zhonghua
View ArticleAD8347 mixer loading
Hello I have some questions from my one of my customers in regard to the device:In non-AGC mode, does he need to place a protection device (PIN diode/limiter) on the input to the mixed to prevent...
View ArticleADuC7060, Keil System Viewer
Hi folks,Im using the EVAL-ADUC7060QSPZ with the keil- µVision application development system. When i debug project's, there is no possibility to watch the the registers with the "System Viewer...
View ArticleClik here to view.
Re: Is there any way to get email alerts when specific questions are posted...
Hi Jeyasudha,You will receive emails about group content if you click the Follow button in the top right of the group's header.Navigate to the group you are interested in. Click Follow> Choose your...
View ArticleRe: what is the difference between ice-1000 and ice-2000?
We currently have the ADZS-HPUSB-ICE. The ICE-2000 appears from specs to be the near equivalent of this older emulator. Is there any practical difference between what the ICE-2000 can do and what the...
View ArticleRe: AD9361 Reference Design for the Altera Cyclone V SoC Board
Hello Dragos A picture is indeed worth a thousand words.Many many thanks for uploading it. BR,Alon
View ArticleRe: Excat location of accelerometer(s) in ADIS16448
Hi Mark,oha, I did not want to convey the idea that this was purely a question of personal taste or our convenience. It is more grounded in an (albeit potentially too dogmatic) requirement of minimal...
View ArticleRe: ADP2325 Problems
Louis, can you please post your schematics here so I can take a look at possible issues? Also have you used the design tool for the ADP2525?Here is the link to it: ADP232x Buck Regulator Design Tool...
View ArticleRe: AD534 SF Problem
Do you have any updates on fixing the AD524J chip? I was trying to get a workaround using log amplifiers but it does not appear as though they are working.
View ArticleA new method for reducing the execution time of radix-2 DIT FFT algorithm
We implemented a new method for reducing the execution time of Real 1024p radix-2 DIT FFT algorithm write in assembler on VisualDSP++ 3.5 (ADSP2181), and we compared the results of this method with...
View ArticleRe: ad vdsp preprocessor at asm
Hi Allif your project contains different translation units like c++, asm files & most of them include some header with c++ specific code, than we can separate compilation control inside the project...
View ArticleRe: S-Parameters file HMC-C059
Katty, Please find attached, IP3, Compression, and S parameters for the HMC-C059. Best regards, Mikecs
View ArticleClik here to view.
Setup ADP1050-51 GUI
Hi, Could you help to solve us ADP1050-51 GUI display problem?My system version:OS:Windows XPAdobe Flash Player:15,0,0,189 Regard,Kevin Tsai
View ArticleClik here to view.
Re: Excat location of accelerometer(s) in ADIS16448
I think that your DOE sounds good. We just would value feedback on the impact this function has, in an application where this level of detail matters. Thank you very much. Thank you for doing this....
View Article