Re: ADV7125+FPGA standard VGA port & sync
Hi Gueneter, With further investigation; I see that the ADV7611 demo board has an ADV7125. The devices are connected together; with ADV7125's SYNC# tied to GND and BLANK# tied to VCC. The ADV7611's...
View ArticleAdv7391
Hi.I Am using Adv7391 to drive monochrome video on dac1 output in format of monochrome PAL. the output configuration is set to YPbPr. Can I drive the 8 bit digital monochrome video to the Y field...
View ArticleRe: Read ADC when iio:device0/ has no in_voltageX files
I found the files, they are /dev/iio:deviceX! Buyt I have another question now: why does /dev/iio:device[0:M] have devices 0 to 6, while /sys/bus/iio/devices/iio:device[0:N] has 0 to 4? I can see two...
View ArticleRe: LF insensitivity in AD835
Hi again Fredric,Unfortunately I'm out of the office until early December, my colleague will look into this in my absence. In the meantime it would be helpful if you would sketch out the input...
View ArticleRe: As for your HART DAC AD5410
Hi David, I got it. I'm clear with this.I will let him know this to our customer.He seems to challenge as first HART model. Keep in touch, Kaos.
View ArticleRe: Adv7391
The ADV7391 is expecting 422 input format. Range limits are only needed for BT.656. What you want is BT.601 format. You can replace CbCr with 0x80 and disable burst. The output will only be...
View ArticleRe: Could ADV7403 support YPBPR/RGB 1080P30 component input?
Hello, I actually have it backwards: ADV7393 can do it but ADV7403 has never been tested with that format. Dave
View ArticleRe: ADV7125+FPGA standard VGA port & sync
Sorry it was CN0282 schematic. http://www.analog.com/en/circuits-from-the-lab/cn0282/vc.html
View ArticleClik here to view.
Re: ADV212 HIPI mode issue(compressed image doesn't match the original image)
Hello, It's still not that clear to me what you are seeing. Can you give me some pixels worth of data-- what the input pixel was and what the decompressed output pixel was? Dave
View ArticleRe: usb to serial connection with Blackfin BF506 and uClinux
Hi Francesco, Is your goal to get Linux running on the BF506? As far as I know, that chip isn't supported by the ADI Linux Project.Aaronwu might be able to give you some more information. Regards, Andre.
View ArticleRe: usb to serial connection with Blackfin BF506 and uClinux
Hello Andrewthank you for answering.I would like to use the linux toolchain to program the BF506, I didn't know it was not supported by the ADI linux project.
View ArticleRe: usb to serial connection with Blackfin BF506 and uClinux
Hi Francesco, My apologies, I mustn't have understood. Is your intention to build bare-metal applications and boot them via U-Boot? If not, can you please provide me with more information of what you...
View ArticleRe: usb to serial connection with Blackfin BF506 and uClinux
Hello Andrew,I might be not clear about my intentions as I am still learning a lot about this topic. I saw the linux toolchain as an alternative to Visual DSP++ to program (or simulate) a Blackfin...
View ArticleRe: FMCOMMS5
thanks Dragos! managed to replicate BOOT.bin with newlly build PL file.-shai
View ArticleRe: usb to serial connection with Blackfin BF506 and uClinux
Hi Francesco, I'm assuming that you're walking through this 'hello world' example. Please be aware that this application will be compiled to run on the Linux environment. As you can see from this page...
View Articlead9520 eval software under win8/virtualbox?
I've been using the eval software under 64-bit windows 7. I want to use the eval software on my 32-bit ubuntu 14.04 laptop. I've installed VirtualBox 4.3.18 and am hosting 32-bit win8. The win8 seems...
View ArticleADV7619 color space conversion
Hi,I'm trying to use the ADV7619 to convert a YCbCr input to RGB output when the source is DVI putting out YCbCr. I know this signal is out of spec (DVI is RGB only), but I want to be able to handle...
View ArticleClik here to view.
technical document for your good ADV7626
Dear Sir/Madam, Good news for you.Our customer choiced your ADV7626, and requested the design support note as "Register Settings Recommendations".So where can I bring the register setting document for...
View Article