Re: AD9361 API drivers for Microblaze
Hi Balaji, You can find the AD9361 HDL project for ZC702 on the GitHub: https://github.com/analogdevicesinc/fpgahdl_xilinx/tree/master/cf_ad9361_zc702 Regards,Dragos
View ArticleClik here to view.
Re: AD5370, AD5371, AD5372 and AD5373 evaluation board software commands
Thank you for posting this! The E0 Initialization function worked for me, I never would have discovered it otherwise. I couldn't figure out why it wasn't working before. Would be nice to add that to...
View ArticleRe: AD9914- Eval board GUI
Hi FreddyS, For your first question, you can jump from profile to profile but not automatically. Unfortunately, our software doesn't support any macros to automate this process. Pins PS0-2 are...
View ArticleAD 9361 changes with standard change
what are the changes in AD9361 when we change the standard from LTE to Wimax??
View ArticleRe: On-OS driver for AD9361 Issue
Paul, I don't see the error in your screenshot.Are you using the latest HDL (https://github.com/analogdevicesinc/fpgahdl_xilinx/tree/master/cf_ad9361_zc702) and the latest No-OS software...
View ArticleRe: 给的例子怎么有错误啊
Hi, The XPAR_AXI_DMA_SPDIF_BASEADDR is defined in the xparameters.h. The file is generated automatically when the BSP project is built. Make sure that you are using the same version of Xilinx EDK as...
View ArticleRe: On-OS driver for AD9361 Issue
Hi Dragos I will check FPGA engineer about SW version issue. Thank you for your help. Thank you. --Paul
View ArticleRe: ADV7511 XILINX EVALUATION BOARDS REFERENCE DESIGN给的例子怎么有错误啊
Hi, Let's continue the discussion on the other opened thread (http://ez.analog.com/message/138135#138135). Thanks,Dragos
View ArticleRe: AD9913 - Programming back-to-back frequency ramps
Hi dmf34, I don't know if we have the same in mind, try resetting the ramp first like setting the Autoclear phase accumulator CFR1 bit 1. I don't know if this works, but we'll try do the easiest and...
View ArticleAre there logic operators available for the GPIO inputs of the ADAU1445?
Hi, We use the ADAU1445 audio processor for intercom - and audio purposes in a video camera system. At startup of the system we load the processor software via the I2C connection. For test purposes in...
View ArticleRe: AD9914/15 POW word
Thanks Louijie Why you are at it could you also determine what the answer is for 'Parallel Data Port mode' as well please. For this mode, page 29 says 16 bits POW word and so does figure 41 which show...
View ArticleAD9914/15 SYNC_CLK output during RESET
Hi During reset what is the SYNC_CLK output status? is it still continuously on undisturbed? ThanksQuang
View ArticleRe: adv7511 Source Product Description Infoframe (SPD)
Hi As you say, the SPD frame consist of two ascii strings and the last byte is source device information but reading the CEA-861 specification it says that unused characters should be NULL (i.e 0x00)....
View ArticleRe: CCES and BF592 Simulator
Hi, We don't provide any support or have any experience with CppUTest so unfortunately i cannot be of much help here. There are certainly eclipse plugins available like the Eclipse plugin for CppUTest...
View ArticleClik here to view.
Re: ADAU1452 - selfboot I2C EEPROM
I still have not idea to work with I2C eeprom and Selfboot mode . Anybody can help me?I checked PCB, replace ADAU and still nothing, it must be a stupid mistake whichI can notfind.I guess I'llhave to...
View ArticleClik here to view.
Re: EVAL-ADAU1701 MINIZ Writeback Circuit
In my ADAU1701 boards I use different WB circuit: and I never hadproblems.
View ArticleRe: adv7511 Source Product Description Infoframe (SPD)
I tried setting the "header bytes" to 0 and starting the complete frame at the packet bytes.Now at least it do not corrupt any audio but no SPD frame is said to be received. Packet memory starting from...
View ArticleBlckfin 60x evalboard with 2xLAN interfaces
Hi !Is there any 3rd Party evalboard with a BF60x and 2xnetwork Interfaces available ??? regards christoph
View ArticleRe: ad5143 I2C data flow/secuence
Hi akhachat, Please refer to the I2C Serial Data Interface Section of the AD5143 data sheet for the step-by-step operation of the 2-wire serial bus protocol. If you wouldn't mind, may I ask which part...
View Article