Re: bug in drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
Hi lluis, have you done the git clone exactly following the link above? After the clone is done, which branch did you check out to? Or what's version your software package is if you are downloading it...
View ArticleCEC clock of ADV8003
Hello. I have a question about CEC clock of ADV8003. As you know, ADV8003 doesn't have CEC_CLK pin.But ADV7511 have CEC_CLK pin. When users need CEC function with ADV8003, is external clock for CEC...
View ArticleAD9361 as a loadable Linux Kernel Module?
I am working on an embedded application in which we need to perform initialization on other hardware before the AD9361 initializes. What is the recommended method for making the AD9361 driver...
View ArticleRe: Ultrafast Comparator for Sine wave at 16KHz
Thanks for your reply Maithil, could I get one of EVAL-ADCMP601BKSZ to try out? I am wondering if it would work at out min voltage level if I use a divider network.
View ArticleRe: ADV7623 compressede audio processing
There's noway for the 7623 to know what the audio format is if the info frame says 'refer to stream header'. DIS_I2S_ZERO_COMPR controls the I2S output depending on compression. Also MUTE_AUDIO can...
View ArticleAdxl345 linux driver freezes, [raspberry pi i2c]
Hello, I did everything like Peetah in this topic :http://ez.analog.com/message/130856?tstart=0#130856 (thanks men)but there is a problem. Sudo evtest /dev/input/event0 returns proper values but in...
View Articleinvalid or corrupts ramdisk??
hi,i downloaded the ubuntu(linaro based) reference design to run on my zedboard....the u-boot builds seamlessly....then the fsbl,system.bit file...creating the BOOT.bin file..then .dtb from...
View ArticleRe: idle tones at 6k and 12k with ADAU1701 and firewire soundcard combi
Hi, Thanks for your help! Indeed, all clocks are derived from the soundcard. I use a CPLD as "glue logic". The soundcard's MCLK = 512*fs, is divided by 2 in the CPLD to get the BCLK (256*fs) for the 8...
View ArticleRe: Reflectation in REFA/REFA* of AD9525
Hi Jacky, > Is this is too long for the termination resistor away from the receiver? You can answer your own question by probing the input, and while you are doing that, put the tip of your finger...
View ArticleRe: ADV7403 digital clamp timing time constant
Hello, I think that is only initially but I'll get an expert on this part to come comment. Dave
View ArticleRe: About AD9889B_Initial_Preset_values question
Hello, Go with the Programming Guide-- it's far more recent. Dave
View ArticleRe: invalid or corrupts ramdisk??
Ali: It shouldn't be booting from a ramdisk - it should boot from the ext4 file system on the SD card. It's likely the kernel command line inside U-Boot. -Robin
View Articlemicrophone for a door locking system
Hello, I am creating a door locking system with communication capabilities and need help choosing a microphone for the system. I will be installing the mic in the locking system located at the handle...
View ArticleRe: microphone for a door locking system
Hello Randy Brunette Welcome to EngineerZone! This group is reserved for questions related to content and the functionality of the community platform You may have better luck re-posting your question...
View ArticleRe: FMCOMMS3 with KC705 eval
Thanks so much for your reply. After looking at it in further detail, I see the more detailed HDL code I was looking for. I think this will work nicely. I do have two further questions: 1. Do you...
View ArticleRe: microphone for a door locking system
Sorry. If you could please move this to the appropriate community I wouldappreciate it.thanks,Randy Brunette On Fri, Apr 18, 2014 at 2:36 PM, DanM <
View ArticleRe: Stuck bit in adv7612 BSTATUS register
Thanks. Big-endian thinking and I reversed the two bytes of BSTATUS..
View ArticleRe: Blackfin - GP Counters
If that is the behavior you are observing, it is unexpected. There are shadow registers in the implementation such that the access by software is atomic to the high and low halves of the 32-bit...
View ArticleRe: OP37
Thank you very much!!! Your hack works well so far and the system is running great!!!
View Article